Reference Materials - Revision history

Blayze: Added info about lack of silkscreen art on the v1.2 boards.

2025-11-11T22:22:19Z

Added info about lack of silkscreen art on the v1.2 boards.

← Older revision		Revision as of 22:22, 11 November 2025
Line 13:		Line 13:

	The version 1.2 boards were a small intermediary run, with 1.3 being the final version. There are a few small differences between the boards:		The version 1.2 boards were a small intermediary run, with 1.3 being the final version. There are a few small differences between the boards:
			* No board silkscreen art (although the pin indicators are still in place).
	* The long-side pins on the v1.2 boards are about 0.8mm left than in the v1.3.		* The long-side pins on the v1.2 boards are about 0.8mm left than in the v1.3.
	* The power LED is positioned closer to the pins in the v1.2 board.		* The power LED is positioned closer to the pins in the v1.2 board.

Blayze: Removes seemingly left-over "Welcome to the wiki!" sentence.

2024-10-29T17:02:17Z

Removes seemingly left-over "Welcome to the wiki!" sentence.

← Older revision		Revision as of 17:02, 29 October 2024
Line 1:		Line 1:
	~~<strong>Welcome to the RoboPad Wiki!</strong>~~

	Here you'll find some useful reference materials, sorted into RoboPad PCB revision number (see the back of your PCB for the revision number of your board!).		Here you'll find some useful reference materials, sorted into RoboPad PCB revision number (see the back of your PCB for the revision number of your board!).

Blayze: Adds rev 1.3 image.

2024-07-10T00:47:15Z

Adds rev 1.3 image.

← Older revision		Revision as of 00:47, 10 July 2024
Line 4:		Line 4:

	== RoboPad Revision 1.1 ==		== RoboPad Revision 1.1 ==
	[[File:Screenshot from 2022-11-06 23-38-46.png\|thumb\|~~699x699px~~]]		[[File:Screenshot from 2022-11-06 23-38-46.png\|thumb\|RoboPad 1.1 pin descriptions.]]

	* The Revision 1.1 RoboPad board is 22.8mm wide by 39.0mm tall, with a maximum thickness of 7.4mm (all +- 0.2mm) and is 8 grams in weight.		* The Revision 1.1 RoboPad board is 22.8mm wide by 39.0mm tall, with a maximum thickness of 7.4mm (all +- 0.2mm) and is 8 grams in weight.
Line 11:		Line 11:

	== RoboPad Revision 1.3 (and 1.2) ==		== RoboPad Revision 1.3 (and 1.2) ==
			[[File:RoboPad 1.3 Pinout.png\|left\|thumb\|544x544px\|RoboPad 1.2 & 1.3 pin descriptions.]]
	The latest generation of the RoboPad, revision 1.3, is currently in the development phase. It's pin functions are largely the same as the 1.2, with a few pins missing. It can drive up to 1.8A on each motor drive pair, and the 3.3v rail is rated for up to 1A (although, as with the 1.1 version, this is to be shared with the RoboPad itself, which draws an average of 300mA and can peak at 800-1000mA).		The latest generation of the RoboPad, revision 1.3, is currently in the development phase. It's pin functions are largely the same as the 1.2, with a few pins missing. It can drive up to 1.8A on each motor drive pair, and the 3.3v rail is rated for up to 1A (although, as with the 1.1 version, this is to be shared with the RoboPad itself, which draws an average of 300mA and can peak at 800-1000mA).

Blayze: Adds v1.3 info.

2024-04-16T02:16:05Z

Adds v1.3 info.

@@ Line 6: / Line 6: @@
 [[File:Screenshot from 2022-11-06 23-38-46.png|thumb|699x699px]]
-* The Revision 1.1 RoboPad board is 22.8mm wide by 39.0mm tall, with a maximum thickness of 7.4mm (all +- 0.2mm) and 8 grams in weight.
+* The Revision 1.1 RoboPad board is 22.8mm wide by 39.0mm tall, with a maximum thickness of 7.4mm (all +- 0.2mm) and is 8 grams in weight.
 * The Reference 3D model as an stl file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here]
 * If you use the [https://www.salome-platform.org/ Salome Platform] as your CAD software, you can find an [https://www.salome-platform.org/?page_id=327 Shaper] part file [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ET2sd6JI5lJJjQtLZkPEAbYBWSUCJyN3JeOXF5FK15xcGA?e=Wvy4n2 here]

Blayze: /* RoboPad Revision 1.1 */ Adds weight.

2023-11-01T22:07:09Z

RoboPad Revision 1.1: Adds weight.

← Older revision		Revision as of 22:07, 1 November 2023
Line 6:		Line 6:
	[[File:Screenshot from 2022-11-06 23-38-46.png\|thumb\|699x699px]]		[[File:Screenshot from 2022-11-06 23-38-46.png\|thumb\|699x699px]]

	* The Revision 1.1 RoboPad board is 22.8mm wide by 39.0mm tall, with a maximum thickness of 7.4mm, all +- 0.2mm.		* The Revision 1.1 RoboPad board is 22.8mm wide by 39.0mm tall, with a maximum thickness of 7.4mm (all +- 0.2mm) and 8 grams in weight.
	* The Reference 3D model as an stl file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here]		* The Reference 3D model as an stl file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here]
	* If you use the [https://www.salome-platform.org/ Salome Platform] as your CAD software, you can find an [https://www.salome-platform.org/?page_id=327 Shaper] part file [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ET2sd6JI5lJJjQtLZkPEAbYBWSUCJyN3JeOXF5FK15xcGA?e=Wvy4n2 here]		* If you use the [https://www.salome-platform.org/ Salome Platform] as your CAD software, you can find an [https://www.salome-platform.org/?page_id=327 Shaper] part file [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ET2sd6JI5lJJjQtLZkPEAbYBWSUCJyN3JeOXF5FK15xcGA?e=Wvy4n2 here]

Blayze: /* RoboPad Revision 1.1 */ Adds dimensions for revision 1.1 board

2023-11-01T00:53:30Z

RoboPad Revision 1.1: Adds dimensions for revision 1.1 board

← Older revision		Revision as of 00:53, 1 November 2023
Line 6:		Line 6:
	[[File:Screenshot from 2022-11-06 23-38-46.png\|thumb\|699x699px]]		[[File:Screenshot from 2022-11-06 23-38-46.png\|thumb\|699x699px]]

			* The Revision 1.1 RoboPad board is 22.8mm wide by 39.0mm tall, with a maximum thickness of 7.4mm, all +- 0.2mm.
	* The Reference 3D model as an stl file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here]		* The Reference 3D model as an stl file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here]
	* If you use the [https://www.salome-platform.org/ Salome Platform] as your CAD software, you can find an [https://www.salome-platform.org/?page_id=327 Shaper] part file [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ET2sd6JI5lJJjQtLZkPEAbYBWSUCJyN3JeOXF5FK15xcGA?e=Wvy4n2 here]		* If you use the [https://www.salome-platform.org/ Salome Platform] as your CAD software, you can find an [https://www.salome-platform.org/?page_id=327 Shaper] part file [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ET2sd6JI5lJJjQtLZkPEAbYBWSUCJyN3JeOXF5FK15xcGA?e=Wvy4n2 here]

Blayze: Adds Salome Shaper part file link

2022-11-07T01:24:29Z

Adds Salome Shaper part file link

← Older revision		Revision as of 01:24, 7 November 2022
Line 6:		Line 6:
	[[File:Screenshot from 2022-11-06 23-38-46.png\|thumb\|699x699px]]		[[File:Screenshot from 2022-11-06 23-38-46.png\|thumb\|699x699px]]

			* The Reference 3D model as an stl file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here]
	The Reference 3D model (.stl) file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here].		* If you use the [https://www.salome-platform.org/ Salome Platform] as your CAD software, you can find an [https://www.salome-platform.org/?page_id=327 Shaper] part file [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ET2sd6JI5lJJjQtLZkPEAbYBWSUCJyN3JeOXF5FK15xcGA?e=Wvy4n2 here]

Blayze: Adds Pinout

2022-11-06T23:41:02Z

Adds Pinout

← Older revision		Revision as of 23:41, 6 November 2022
Line 4:		Line 4:

	== RoboPad Revision 1.1 ==		== RoboPad Revision 1.1 ==
			[[File:Screenshot from 2022-11-06 23-38-46.png\|thumb\|699x699px]]


	The Reference 3D model (.stl) file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here].		The Reference 3D model (.stl) file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here].

Blayze: Added page and link to stl file

2022-11-06T23:35:07Z

Added page and link to stl file

← Older revision		Revision as of 23:35, 6 November 2022
Line 4:		Line 4:

	== RoboPad Revision 1.1 ==		== RoboPad Revision 1.1 ==


			The Reference 3D model (.stl) file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here].

Blayze: Created page with "Welcome to the RoboPad Wiki! Here you'll find some useful reference materials, sorted into RoboPad PCB revision number (see the back of your PCB for the revision number of your board!). == RoboPad Revision 1.1 =="

2022-11-06T23:14:47Z

Created page with "<strong>Welcome to the RoboPad Wiki!</strong> Here you'll find some useful reference materials, sorted into RoboPad PCB revision number (see the back of your PCB for the revision number of your board!). == RoboPad Revision 1.1 =="

New page

<strong>Welcome to the RoboPad Wiki!</strong>

Here you'll find some useful reference materials, sorted into RoboPad PCB revision number (see the back of your PCB for the revision number of your board!).

== RoboPad Revision 1.1 ==