Emergency stop state: Difference between revisions
(Added info on disarming) |
(→Testing Emergency Stop State Behaviour: Adds reference to the heartbeat timeout option that controls how long it takes for stop state behaviour to kick in.) |
||
| Line 3: | Line 3: | ||
=== Testing Emergency Stop State Behaviour === | === Testing Emergency Stop State Behaviour === | ||
If you are running an event in which RoboPads are being used, you may want to make sure that all RoboPad-based robots behave in a safe and expected manner when they enter this state. While simply getting the user to navigate to the homepage ''will'' get the RoboPad into the emergency stop state, the most sure fire way to test a RoboPad's behaviour when phone-RoboPad communication is broken is to physically break it. The recommended way to do this is to get the user to place the connected phone into a tin-foil (or other Faraday-cage equivalent that works for the 2.4Ghz radio range) lined box and close the lid, forcibly terminally disrupting the signal between the phone and the RoboPad, and then observing that the RoboPad-based robot responds in an appropriate and safe value. | If you are running an event in which RoboPads are being used, you may want to make sure that all RoboPad-based robots behave in a safe and expected manner when they enter this state. While simply getting the user to navigate to the homepage ''will'' get the RoboPad into the emergency stop state, the most sure fire way to test a RoboPad's behaviour when phone-RoboPad communication is broken is to physically break it. The recommended way to do this is to get the user to place the connected phone into a tin-foil (or other Faraday-cage equivalent that works for the 2.4Ghz radio range) lined box and close the lid, forcibly terminally disrupting the signal between the phone and the RoboPad, and then observing that the RoboPad-based robot responds in an appropriate and safe value. | ||
It's also worth noting that the Emergency Stop Behaviour sets in after a certain amount of time configurable under the RoboPad's [[The Management Page#General Configuration|general configuration options]] - the ''Heartbeat Timeout''. This can be set by users up to '''seven seconds''', so if you want to be certain that safety has been considered, you may want to check that this value is set to a reasonable option (anything under 3 seconds in order to comply with [https://www.robotwars101.org/ants/rules.htm Antweight World Series Specifications]). | |||
Latest revision as of 18:30, 26 February 2023
Whenever the RoboPad looses signal from the phone that is connected to it, or the user is not in the "Control Robot" screen, the RoboPad will enter it's emergency stop state. In this state The RoboPad attempts to be as safe as possible by reverting all active IO Units to their emergency stop state behaviour, which will change depending on how the user has configured each IO Unit. In particular, H-Bridge motors and Brushless motors should revert to stopped states. This will also disarm all IO Units, meaning that a control signal will have to be sent that passes through their safe values in order for them to move again.
Testing Emergency Stop State Behaviour
If you are running an event in which RoboPads are being used, you may want to make sure that all RoboPad-based robots behave in a safe and expected manner when they enter this state. While simply getting the user to navigate to the homepage will get the RoboPad into the emergency stop state, the most sure fire way to test a RoboPad's behaviour when phone-RoboPad communication is broken is to physically break it. The recommended way to do this is to get the user to place the connected phone into a tin-foil (or other Faraday-cage equivalent that works for the 2.4Ghz radio range) lined box and close the lid, forcibly terminally disrupting the signal between the phone and the RoboPad, and then observing that the RoboPad-based robot responds in an appropriate and safe value.
It's also worth noting that the Emergency Stop Behaviour sets in after a certain amount of time configurable under the RoboPad's general configuration options - the Heartbeat Timeout. This can be set by users up to seven seconds, so if you want to be certain that safety has been considered, you may want to check that this value is set to a reasonable option (anything under 3 seconds in order to comply with Antweight World Series Specifications).