Reference Materials: Difference between revisions

From RoboPad Wiki
Jump to navigation Jump to search
(→‎RoboPad Revision 1.1: Adds dimensions for revision 1.1 board)
Line 6: Line 6:
[[File:Screenshot from 2022-11-06 23-38-46.png|thumb|699x699px]]
[[File:Screenshot from 2022-11-06 23-38-46.png|thumb|699x699px]]


* The Revision 1.1 RoboPad board is 22.8mm wide by 39.0mm tall, with a maximum thickness of 7.4mm, all +- 0.2mm.
* The Revision 1.1 RoboPad board is 22.8mm wide by 39.0mm tall, with a maximum thickness of 7.4mm (all +- 0.2mm) and 8 grams in weight.
* The Reference 3D model as an stl file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here]
* The Reference 3D model as an stl file can be found [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ER1EQw8nlj1OqL284UU0u8gBAGXYZWUz_lbg3cSi9Tfk_A?e=rcFHFr here]
* If you use the [https://www.salome-platform.org/ Salome Platform] as your CAD software, you can find an [https://www.salome-platform.org/?page_id=327 Shaper] part file [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ET2sd6JI5lJJjQtLZkPEAbYBWSUCJyN3JeOXF5FK15xcGA?e=Wvy4n2 here]
* If you use the [https://www.salome-platform.org/ Salome Platform] as your CAD software, you can find an [https://www.salome-platform.org/?page_id=327 Shaper] part file [https://yelllowcube.sharepoint.com/:u:/s/BlayzeTechLimited/ET2sd6JI5lJJjQtLZkPEAbYBWSUCJyN3JeOXF5FK15xcGA?e=Wvy4n2 here]

Revision as of 22:07, 1 November 2023

Welcome to the RoboPad Wiki!

Here you'll find some useful reference materials, sorted into RoboPad PCB revision number (see the back of your PCB for the revision number of your board!).

RoboPad Revision 1.1

Screenshot from 2022-11-06 23-38-46.png
  • The Revision 1.1 RoboPad board is 22.8mm wide by 39.0mm tall, with a maximum thickness of 7.4mm (all +- 0.2mm) and 8 grams in weight.
  • The Reference 3D model as an stl file can be found here
  • If you use the Salome Platform as your CAD software, you can find an Shaper part file here